Self-Perform Operations
Electrical
Design, install, test, maintain
Power distribution
Medium voltage
Backup power
Lighting
Low voltage
Industrial
Testing
Service
Power distribution
Service to branch
Medium voltage
Substations & feeders
Backup power
Generators & UPS
Lighting
Interior, exterior, controls
Low voltage
Interior, exterior, controls
Industrial
Motors & controls
Testing
Commissioning & studies
Service
Maintenance & upgrades
Power Distribution
Service entrances, switchgear, transformers, panelboards, busway, feeders and branch circuits sized and installed to the design load.
Coordination studies, arc-flash labeling and selective device settings are completed so a fault clears at the right breaker.
Medium Voltage & Substations
Pad mount and unit substations, MV switchgear, cable terminations, duct bank and site distribution up to utility interconnection.
Work is planned with the utility and the owner so outages are short, scheduled and fully coordinated.
Backup & Standby Power
Generators, automatic transfer switches, UPS systems and paralleling gear for facilities that cannot lose power.
Load banks, transfer testing and fuel system coordination confirm the system performs the way the design intended.
Lighting & Lighting Controls
Interior, exterior, site and emergency lighting with occupancy, daylight and time-based control strategies.
LED retrofits are evaluated against utility incentives and measured energy savings before the scope is set.
Low Voltage & Building Systems
Structured cabling, fire alarm, access control, CCTV, nurse call, paging and controls infrastructure.
Pathways, grounding and terminations follow one standard so the systems are testable and documented at turnover.
Industrial & Process Electrical
Motor control centers, VFDs, control panels, instrumentation and equipment connections for process and utility plants.
Installations are built around production schedules, with tie-ins planned for approved shutdown windows.
Testing & Commissioning
Acceptance testing, insulation and continuity verification, breaker and relay testing, thermographic scans and functional commissioning.
Results are documented as the electrical record the owner keeps for maintenance and compliance.
Service, Maintenance & Upgrades
Preventive maintenance, infrared surveys, panel and switchgear upgrades, and emergency repair for existing facilities.
Scopes are staged so occupied buildings stay energized while aging equipment is replaced.
Our Difference
Why Choose Emmaty Construction?
Design & coordination
Load calculations, single-line development, equipment selection and clash coordination with mechanical, structural and architectural work.
Procurement & prefab
Long lead gear is released early and assemblies are prefabricated off site to shorten the schedule on the floor.
Installation
Rough in, gear setting, cable pulls and terminations performed by licensed electricians under an OSHA-compliant safety plan.
Test & energize
Acceptance testing, coordination settings, functional checks and owner training before the system is placed in service.
Credentials
What’s trending in Electrical
